Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: How To: B14: Installing New Cluster Gauge Lights

+ Reply To Thread
Posts: 41-50 of 64
2010-04-20 17:11:28
#41
I just ordered mine up from the same site vadim threw up. Got cluster bulbs, a/c control bulbs, and a new dome light... should come out sick!
2010-05-24 01:18:22
#42
Hopfully installing blue cluster lights in my 99 Nissan Sentra GXE(this should be similar to the installation listed on this thread right?), but I'm having trouble finding which specific bulbs I need to buy off superbrightleds.com? Thanks
2010-05-24 01:31:52
#43
Originally Posted by Boombadan
Hopfully installing blue cluster lights in my 99 Nissan Sentra GXE(this should be similar to the installation listed on this thread right?), but I'm having trouble finding which specific bulbs I need to buy off superbrightleds.com? Thanks


Figured it out and am ordering the lights!
2010-05-27 19:56:12
#44
How did you manage to turn in the bulbs without breaking them? Did you just do it with your hands? I got my lights yesturday and plan to install them tomorrow!
2010-05-28 00:10:43
#45
By hand, it should be fairly easy, though I did hear of them baking onto the bulbs.
2010-05-28 04:40:04
#46
Originally Posted by Boombadan
How did you manage to turn in the bulbs without breaking them? Did you just do it with your hands? I got my lights yesturday and plan to install them tomorrow!


I'm not sure I understand what you're saying, are you referring to how to get the bulbs out of the cluster, or the bulb out of the socket? However, all things related to the bulb are done with hands, no tools. To get the sockets out of the cluster, you twist them a half turn (probably counter-clockwise, but I didn't pay attention). With the B14, the old bulbs should just pull straight out from the socket, then replace with the LEDs straight in. On my B13, the bulbs were attached to the socket and the base of the bulb broke when I pulled it out, damaging the socket. You can pick some up at a good automotive store if that happens to you. Then put the socket back into the cluster and turn halfway the opposite direction.
2010-05-29 15:45:33
#47


Interior Lights kit from Ledglow.com, 3 strobe LED lights 12v, and the Cluster LEDs I installed yesturday Next will be the AC leds
2010-05-29 15:59:48
#48
Originally Posted by mmendoza_s




im also doing the a/c light on the a/c controls, intermitents soon


Is there a write up on how to install the shifting lever Led blubs? Or if not, what type of bulbs did you buy?
2010-08-03 01:35:50
#49
Originally Posted by mmendoza_s




im also doing the a/c light on the a/c controls, intermitents soon


Anyone know which bulbs he used on the shifter?
2010-08-04 00:38:02
#50
There's a single 168/194 (the same as the cluster) bulb in there you just have to pop the cover off with a flathead screwdriver and move the p/r/n/d/etc thing out of the way to get to it
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top