Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: The Ultimate Wideband o2 Sensor Shootout - Credits to Mike Kojima

+ Reply To Thread
Posts: 11-15 of 15
2011-01-11 00:37:53
#11
very good material right there. I think this thread deserves a sticky. Nothing can beat the Innovate, i personally havent used them but ive heard nothing but great things from them.

I usually go with the AEM UEGO which is the next best thing and half the cost. Its accuracy and longevity seems to prove out. As far as the datalogging capabilities. If you download the program needed you can datalog using a laptop or if you are running an AEM you can wire it into the o2 lead on the ECU which is for your #1 o2 sensor and it will use the wideband signal to both control a/f ratio and datalog it if wanting.

Yes the Innovate comes with its own programing all ready to go so its simpler and thats a good thing for most people. But glad to see the AEM held its own. Best bang for the buck wideband out there by far.
2012-05-03 20:26:27
#12
I have looked around but I can't seem to find where the best place is to position the wideband on our vehicles... Usdm 96 sr20de... Keep both stock o2s?? Sorry for the noobish question...
2012-05-04 01:30:26
#13
I like to put mine right behind the flex pipe, right after the oil pan at 12 o'clock. This way it's far enough and easy to get to, and doesn't get soaked with condensation.
2012-05-04 03:52:13
#14
So pointing straight down?
2012-05-04 03:58:22
#15
This is where it was originally at, bad spot:


This is where I put it:
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top