Thread: Junkyard/Pick-N-Pull Injectors

I'm with tek, I wanna know more about these crown vic injectors...haha. Are they top feed high impedance? And is it as simple as adjusting the k value and latency like every other injector??

EDIT: Searched it and all I can seem to find is that they are 19lb injectors, which is way under 1600cc's.

the crown vics are top feed low impendence 160lb injectors they flow 1680cc

couple years ago u could buy them brand new 30 dollars a pop plus like 10 dollar core charge lol now i cant find them anywhere ill get the part number for you if you are interested

http://www.rx7club.com/showthread.php?t=693126

here i found a thread about them a while back

i think the big injector companys like rc ect pulled them of the market or just simply bought them out so they could mark up the price

They are top feed low impedance. I highly doubt you can run these injectors on any Calum ECU.

You will need something with much better injector control.

Also fyi not all q45 injectors will work ONLY the early ones that have a disk style tip.

For the money I just recommend modding stock injectors to 650's for 200 bucks though witchhunter. Or do it yourself and have them flow tested and match them to your needs.

injector modding

injector modding take 2

Hope that helps.



Yes like nisda, nisda runs large injectors with no issues.

Does it matter which year the injectors came out of the VIC????

what color are the early q45 injectors ?? i found some but they are brown,being 370's i would have expected them to be purple

I have a set of what are claimed to be 370's, although they are not purple tops. I think the Q45 370's are more of a tannish grey. I'll take some pictures later.

Anyone know what size injectors the VG30DE has? They are from a Infiniti J30. Thought the VG30DE had the same as the SR20DE. At least that's what I was told....

Local junkyard has a MESS of VG30DE's, VG33E, and a boatload of engines with high-flow, top-feed injectors. Most just came in within this week. Might go do some shoping here soon!

Injectors also from 240sx dual cams and fwd Ka240des also drop right In It's the same Injector.

Also turbo 2 rx7 Injectors are 550cc all around, primary n secondary. so get those and you have your self a full set of 550's!

I've seen several RX-7's, but very few that were turbo, or had the entire front clip cut off.

I read earlier in this thread about the crown vic injectors. The yard I usually go to is where the local police dept.'s scrap out their cruisers.