Thread: Junkyard/Pick-N-Pull Injectors

Seeing as many memebrs of our community are quite thrifty (Hell I'm a cheap bastard) I think it would be a good idea to compose a list of viable injectors that can work for the SR20's.



Right off the top of my head:

Side Feed Injectors (OEM Fuel Rail for USDM FWD SR20's)
Infinit Q45 91-96: 370CC Injectors no modifications needed

Z32 Twin Turbo: 37CC Injectors no modifications needed

Subaru STI 04-06 IIRC): 520CC Will require injector clips from the Subaru but drops in

Top Feed Injectors (Will Require Topfeed Fuel rail)

Can't think of any at the moment

Feel Free to continue guys.

Great idea! I'm gonna move this to the tech section

Top Feed Injectors (Will Require Topfeed Fuel rail)

dsm manual 450cc (needs resistor box)
dsm auto 390cc (needs resistor box)
mkiii supra 440cc (needs resistor box)
probe/mx6 turbo 370cc
crown victoria ng 1600cc
MR2 Turbo 440cc (needs resistor box)
RX-7 Twin-Turbo Primary 550cc Secondary 850cc
buick riviera, s/c 308cc
FORD 3.8L S/C V6/GM Truck 4.3L V6 Turbo 295cc
volvo 2.3L Turbo 294cc (needs resistor box)
audi 2.2l turbo 304cc
ford 5.0 80's 440cc (needs resistor box)

I think that's good for now. Enjoy.

What? Crown Vic's have 1600cc injectors?! OR does NG stand for Natural Gas? CNG?

That is correct but your tuning better be spot on otherwise your idle with either be **** or non existent. These require a bit more then a jwt chip, open source tuning is needed.

wow this is a great thread.


so any side feed injector listed will work with our fuel rails?

i mean obviously if you upgrade injectors you will need a tune or new ecu?


so if any one of my 370's goes bad i could just look for an injector for a 91-96 Q45?


thats awsome

rx7 550 or 850 side feeds need adapters because they are too long

can the 02 - 05 G35 and Q45 injectors fit in the SR rail?

I've tried 91-96 Q45 injectors and the connectors didn't match up.

Here's a tip, cut off the injector harness with the injectors. You can extract the wires out of the injector clips.