Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: AGX & Koni Rod diameter

+ Reply To Thread
Posts: 1-10 of 15
2009-04-03 15:30:42
#1
AGX & Koni Rod diameter
So after searching everything, I noticed this very crucial peice of information missing from Shawn B's suspension thread, I thought I would put this in here because it frustrated the heck out of me finding the correct bumpstops.
2009-04-03 15:53:28
#2
Euro rear B13 is 51mm, USA is 45mm (taken from another thread)
2009-04-03 16:04:12
#3
Koni Bumpstops

part # | Rod Diameter | Length | Characteristic

70.34.05.000.0 12mm .... 45mm Linear soft
15.34.20.000.0 12mm .... 55mm Progressive soft
72.34.48.000.0 14mm .... 25mm Linear soft
71.34.42.000.0 14mm .... 40mm Progressive hard
70.34.54.000.0 16-20mm 40mm Progressive soft
70.34.53.000.0 16-20mm 55mm Progressive soft
70.34.95.000.0 22-24mm 55mm Progressive soft

Energy Suspension Bumpstops (from their website)

2009-04-03 16:11:22
#4
Thank you koni!!!

This is direct from the koni representative.
2009-04-03 17:42:09
#5
91-93 Sentra
86-2463 front = 18mm rod
86-2464 rear 51mm (euro)= 22mm rod
86-2465 rear 45mm (USA)= 18mm rod

95-98 200sx se-r
8640-1354 = 18mm rod
8040-1220 = 12mm rod

98-01 Sentra se
8610-1409Sport = 20mm rod
80-2838Sport = 12mm rod

02-06 Sentra se-r spec-v
8610-1409Sport = 20mm rod
80-2838Sport = 12mm rod
2009-04-06 14:38:10
#6
It doesn't interest me, but since it has been requested on the other site, I emailed kyb for theirs as well.
These are for AGX's

B13:
733014 - 18mm
732001 - 20mm

B14:
733008 - 20mm
741021 - 12.5mm


Someone will have to chime in to let us know if there are b15 applications, because right now there wasn't any on the website.
2009-04-06 21:48:42
#7
Im curious which Koni Yellow i can use in the back on Euro B13. Anyone know? Front are fine B15 SpecV.
2009-04-06 22:11:13
#8
Originally Posted by canx2k
So after searching everything, I noticed this very crucial peice of information missing from Shawn B's suspension thread, I thought I would put this in here because it frustrated the heck out of me finding the correct bumpstops.

Awesome detective work. Thanks for the PM.

I was updating the Suspension Thread a couple months back, and then I got busy with my various threads as I restored my Classic.

However, updates are always in the works. This information is terrific and shall certainly be included.

2009-04-08 13:26:27
#9
great work. Shawn if you could add that to your sus thread that would be great. I cant remember half the time where it was I found the numbers. This will help tremendously for my spherical bearing measurements on my solid mounts.
2009-04-08 13:39:27
#10
Should this be merged with the Suspension thread?

From what I got the best ones were 40mm the ones sold by GoFastDepot here: Go Fast Depot
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top