Thread: Sunroof switch wiring need help!

Hi... hoping somebody can help me out with this... the problem is as follows:

+ my car has an aftermarket sunroof installed (previous owner)
+ it works properly the switch that was installed had no issues`
+ that switch was removed in order to change the headliner and they couldn't wire it again
+ there are 6 wires total, 2 from the sunroof motor, 2 grounds and 2 12v supplys
+ if you hook up 1 wire from the motor to 12v and another one to ground it opens, change them over and it closes
+ the sunroof's only got 2 choices, open & close
+ the switch's got 6 pins... (pictures in the afternoon)
+ i don't mind having to buy another switch, but i'd need to know what kind of switch it'd be hopefully someone's got a pic or a diagram i can use!!!

if you need any more info please let me know!!!

i'll try to post wich pins show continuity when the switch is pressed here's a crappy drawing to give you a general idea:

any opinions bout this diagram?
http://www.techwebasto.com/sunroof_main/sunroof_push_hold_schematic.pdf