Thread: B13 B-Pillar Seatbelt Swap Issue

Hey guys,

I am just seeing if anyone may have a solution for a problem i'm having with my B-pillar seatbelt swap for my B13.

My issue is that the seatbelt warning indicator light on my cluster never goes off when my seatbelt is buckled. There are only 2 wires in the harness connecting to the seatbelt buckle and i have tried both combinations of connections. This is with B14 front belts and buckles.

Has anyone else ran into this problem? if so, what did you do to correct it, if anything?

lmk when you can guys!

Thanks!

branden
aka hawaiiaNX

SIMPLE solution just complete teh ground with those wires so the light says off. Or break the ground, whichever way it works so the light shuts off with the wires.

It's because of the wires in the door that attached to the original seat belts. I plan on just removing the bulb at some point. But mine used to come on randomly before the swap, so I'm used to seeing it.

Hmm...I am going to look into this...



I will investigate this along with the above.

Thanks guys.

Branden
aka hawaiiaNX