Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Wiring up an amp.

+ Reply To Thread
Posts: 11-13 of 13
2011-11-20 17:57:58
#11
Originally Posted by squirlz
Take out the inner fender liner on the drivers side, you will see a huge 4" grommet. Poke the wire through and watch it come out the other side. Nothing is easier than this.


X2. By far the best place also for running the power line of any size.
2011-12-04 12:07:03
#12
What I did on mine was there was this 3, maybe 4 in circle right at about where the glove box is and I ran my 0 gauge through there... Cut a hole in the rubber with a razor and then ran it through my car... When I bought my eclipse this guy had ran the wire through the fender and everytime the door shut it would pinch the wire =\

I could take pics if you haven't done it yet and need to see?
2011-12-04 19:32:15
#13
Can also cut a slit in the rubber grommet where the engine harness goes through the firewall and feed the power wire through there. The hole is plenty big enough for even a 0 gauge wire.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top