Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: How To: Crank pulley -- Oil Pump -- Spacer (all common combinations explained!)

+ Reply To Thread
Posts: 61-64 of 64
2022-05-24 11:07:34
#61
Oh boy, from memory I think you could probably slide the DE collar out and slide the VE collar in. Getting the DE collar out will be the hard part. You could probably get it done with a strong magnet. Or worst case drilling into it and threading a small screw into the hole for purchase. You might even be able to blow it out with compressed air or something...
If it doesn't work right away, maybe spray some aerosol lubricant in the to loosen everything up.
Last edited by BenFenner on 2022-05-24 at 11-09-05.
2022-06-08 13:54:07
#62
I really appreciate this thread, but I've had a question that I haven't found answered here.

My current setup is DE engine/crank, with VE oil pump/pickup tube, Gspec alu pulley and Gspec spacer.

Simple enough, right?

But I'm considering getting an ATI Super Damper.

I found a 7-year-old comment from Chris Turner on the facebook group saying that his setup is DE crank, Gspec spacer, VE pump, then ATI damper.

That just about put my mind at ease, but then I saw that ATI sells part number #916298 as a .2" (or 5mm) spacer " NISSAN SR20 - USE W/BASE DE ENGINE."

I think ATI's spacer is potentially similar to the early-gen Gspec ones, since it doesn't appear to have the flats on either side.
I'm just not sure.

2022-06-12 18:50:39
#63
Worst case scenario you have to grind their spacer a bit, or grind their pulley a bit. Shouldn't be a big deal.
2022-08-07 19:51:38
#64
I needed the ATI spacer for my DE since that pulley was designed for the DET pumps. I had to call ATI to ask for a spacer and the person was blowing me off completely until I insisted I had an ATI part #. I gave them the part number, they said they had stock, went to confirm its physical existence and then took my credit card over the phone. I haven't even installed it yet. I just know I will need it. With the VE pump, I dunno. Never had a VE pump to play with.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top