Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: ve crank pulley on gtir pump

+ Reply To Thread
Posts: 1-6 of 6
2015-07-27 17:40:30
#1
ve crank pulley on gtir pump
has anyone tried this? what need to be done?
2015-07-27 21:35:44
#2
Can't do it. The water pump/ps pulley on the crank is smaller in diameter than the gtir one. This is because the gtir housing is larger than the rest due to the gears being thicker. You have to use a gtir pulley.

Sent from my SGH-I337M using Tapatalk
2015-08-03 17:22:09
#3
so other option it's either I need to upgrade to ve oil pump with ve pulley ?
2015-08-04 08:41:31
#4
or gtir pump and gtir pulley. Ve pump will accept de pulley but you need to be careful of what spacer you need and in some cases may need machining to maintain belt alignment. Here is the guide and explanation with great pics. http://www.sr20-forum.com/howto-s/24618-how-crank-pulley-oil-pump-spacer-all-common-combinations-explained.html

I would use the GTIR pump. It's the best.

edit: nm I see you are already in that thread.
Last edited by Lynx on 2015-08-04 at 08-44-03.
2015-08-09 14:22:36
#5
thnx for info @Lynx still trying to find crank pulley.
2015-08-09 14:30:21
#6
I have a ve and a gtir pulley and oil pumps to match

Sent from my SGH-I337M using Tapatalk
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top