Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Madtec's Pulsar update...

+ Reply To Thread
Posts: 11-20 of 160
2012-07-16 22:57:48
#11
Originally Posted by nickr
could have done this with the torque mounts Torque Mounts with Energy Suspenion 7.1105g From Sentra/NX or Prothane 14-503 Sentra Dogbone | Canada GTiR


Madtec's way is cooler.
2012-07-16 23:25:40
#12
Originally Posted by Keo
Originally Posted by nickr
could have done this with the torque mounts Torque Mounts with Energy Suspenion 7.1105g From Sentra/NX or Prothane 14-503 Sentra Dogbone | Canada GTiR


Madtec's way is cooler.


sure if it makes u feel happy

if madtec makes some fender braces then i'll say give the cool nod and buy from him
2012-07-17 01:41:23
#13
Originally Posted by nickr
Originally Posted by Keo
Originally Posted by nickr
could have done this with the torque mounts Torque Mounts with Energy Suspenion 7.1105g From Sentra/NX or Prothane 14-503 Sentra Dogbone | Canada GTiR


Madtec's way is cooler.


sure if it makes u feel happy

if madtec makes some fender braces then i'll say give the cool nod and buy from him


On my list but way down.....
2012-07-17 01:50:38
#14
Originally Posted by nickr
could have done this with the torque mounts Torque Mounts with Energy Suspenion 7.1105g From Sentra/NX or Prothane 14-503 Sentra Dogbone | Canada GTiR


I initially looked at doing it this way but i would be stuck with the old mount bracket, so i decided to redesign the dog bone mount and what you see is actually the 4th iteration.
2012-07-19 01:18:01
#15
Engine removed this pass weekend and gutting to get the engine bay painted.....it was too much of an eye sore the way it is

2012-08-01 16:49:45
#16
Prototype Bushings....

2012-08-01 16:55:19
#17
Nice
Last edited by Naghebe on 2012-08-01 at 16-56-07.
2012-08-02 10:37:26
#18
Originally Posted by Madtec
Prototype Bushings....



are you going to sell these in the future?
2012-08-02 12:58:08
#19
Originally Posted by theo
Originally Posted by Madtec
Prototype Bushings....



are you going to sell these in the future?



Theo,
I have no real plans for it, i just started designing parts for my car as it is a little difficult to find good stuff for the pulsar, the dog bone and rubber inserts are 3d printed materials and once the design is proven i will have them made.

Here are some info on the rubber inserts; it is Tango Gray made by Objet
Rubber-like | Objet.com
2012-08-02 16:11:04
#20
another option if you're interested Produits | Turbine Tech
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top