Thread: pulsar hnn15. swap sr20vet

Hi, I'm from Russia
pulsar hnn15, 4wd
sr20vet
mt
[img]http://per_s.users.photofile.ru/photo/per_s/96374260/xlarge/120030725.jpg[/img]

I have a question. Is it possible to remake the hub under five pins 5x100?

[img]http://per_s.users.photofile.ru/photo/per_s/96328437/xlarge/119003024.jpg[/img]

excuse me for the translation please

Welcome! Excellent conversion. Do you have a picture of the outside of the car?

Redrill to 5x100 is possible, yes, but would need an engineer to do it as it must be accurate. I have not seen it done before though.

What ECU / Computer are you using for this motor ?

Yes. There are many photos of the car. you are interesting to look at the manufacturing process?
[img]http://per_s.users.photofile.ru/photo/per_s/96374260/xlarge/118566159.jpg[/img]
[img]http://per_s.users.photofile.ru/photo/per_s/96328437/xlarge/115044240.jpg[/img]
[img]http://per_s.users.photofile.ru/photo/per_s/96328437/xlarge/118613733.jpg[/img]
ECU from the Russian car Janvar '5.1 Development of GM. The wiring to it and setting himself doing
[img]http://per_s.users.photofile.ru/photo/per_s/96498974/xlarge/119378547.jpg[/img]
[img]http://per_s.users.photofile.ru/photo/per_s/96498974/xlarge/119361252.jpg[/img]
[img]http://per_s.users.photofile.ru/photo/per_s/96498974/xlarge/119429910.jpg[/img]

exploring the possibility of installing the wheel hub of SILVIA and SKYLINE

[img]http://per_s.users.photofile.ru/photo/per_s/96516821/xlarge/120245423.jpg[/img]
[img]http://per_s.users.photofile.ru/photo/per_s/96516821/xlarge/120245433.jpg[/img]
[img]http://per_s.users.photofile.ru/photo/per_s/96516821/xlarge/120245428.jpg[/img]
[img]http://per_s.users.photofile.ru/photo/per_s/96516821/xlarge/120239865.jpg[/img]
[img]http://per_s.users.photofile.ru/photo/per_s/96514533/xlarge/120110946.jpg[/img]

Thankyou for the pictures.

I see a hydraulic (fluid) handbrake ??

[url]http://per_s.users.photofile.ru/photo/per_s/96328437/xlarge/118613733.jpg[/url]

Do you have a picture of the rear differential and rear suspension / under frame ? Thankyou.

[img]http://per_s.users.photofile.ru/photo/per_s/96328437/xlarge/118709570.jpg[/img]
[img]http://per_s.users.photofile.ru/photo/per_s/96496671/xlarge/119361481.jpg[/img]

This is my logbook in Russian.
Per_s\ïóëÿ Sr-v... ))) Ïîñòðîèë!!! Sr20vet/ìåøàëêà/4wd - NISMO-CLUB .RUSSIA
There are many descriptions and photos.

I see a hydraulic (fluid) handbrake ??

Yes. Because the rear set ventilated discs 257mm

Ahhh i understand. You put fromt brakes at the back.

Yes.

VERY GOOD ! Excellent you take so many pictures. Very helpful.