Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Will be ordering soon.

+ Reply To Thread
Posts: 1-10 of 14
2008-05-29 02:22:06
#1
Will be ordering soon.
I'm going to be ordering something from the site soon for my turbo setup. Wondering if there were any deals ya can swing and some questions.

1.Prothane Motor Mounts. Do you have these in stock?
2.T25 Oil Line Kit. Since you plug the line into the back of the block where does the line go that was originally there? Do I need to find a split for it?
3.Fuel Pressure Line and Gauge. Where is the Best place to mount this?
4.The Water Line Kit. Confused on this? Where do these go on, the turbo or where you connect them into the lines? Or is there another way I can get around these things? There pretty expensive lol

Think thats about it. Will be ordering in the next week or so. Thanks
2008-05-29 15:11:35
#2
1. Prothane mounts not in stock. Should be here in a couple of weeks.

2. Got all the fittings for one line kit. You'll be removing the stock oil pressure sensor to run this line. And there's a T down the line for you to add an oil pressure gauge.

3. Don't have all the parts in stock to put this together. It comes with a 1' line, so your places are pretty limited. Either the firewall, or strut tower. I have this on my car on the strut tower.

4. Have these in stock. They go on the turbo, then you decide where you're going to run the lines to. Most people pull the coolant lines out of the throttle body, and connect the turbo water lines there. You can always use the stock hard lines, just cut them, and run a hose, but they'll be prone to leak.
2008-05-29 16:27:53
#3
Wouldn't the oil pressure like light or w/e come on if that sensor wasn't plugged in?

and when will you have the rest of the things in stock? I think I'll just use my stock lines and see what happens lol
2008-05-29 17:18:36
#4
No, when you remove the stock pressure switch, you'll have no oil light at all. if you leave the sensor connected to the plug, then it will stay on.
2008-05-29 22:31:29
#5
Alright cool. When would I be able to order all this without the water line fittings and with the fuel pressure gauge? Thanks Serb
2008-05-30 03:50:42
#6
also will be ordering the shifter stabilizer bracket and the shifter bushings
2008-05-30 12:57:35
#7
You can place the order whenever you want. I don't have all the parts in stock, but when they all get in, it will ship to you.
2008-05-31 01:18:57
#8
i found a oil line used, its the gofastdepot one but has a gauge with it so im gonna get that instead. but i'll be ordering everything else still. Only thing with the used line is that the 1/8 bspt to 1/8 npt adapter is gone. Can you get one of those?

Can you get the fitting that goes into the block for the oil return also?
2008-06-03 23:22:36
#9
Serb, any word if you can get those 2 fittings for me?
2008-06-04 21:20:43
#10
Yes, I can get both fittings for you, what size if the hole in the block? and what size return line will you be using?
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top