Thread: B14 1.6 to SR20 ?'s...

wrong^ 93 in a half and 94 b13 have electornic speed sensors.. i would know cause i have one...

second as i said before in my first post i mentioned i had a 94 sentra and somebody else mentioned it to i was just stating that i did it without changing anything

third with the new info provided about the diffrence in harnesses the donor way i guess would be better then splicing. its cleaner safer and better...

^ good point , however i have seen way more 91 ,92,93 models than 93.5 and 94.

at least down here in florida.

we have hundreds of 91-94 sentras in the south and i would say only about 25% of them are on the forum, or less.

not being a smart as Jen, but it is quite amazing the amount of classics seen down here.

use the ga16 harness its works fine

When will people get this.

On a B14 the cluster wiring is DIFFERET plain and simple. If you want to use the SER cluster you will have to use the SER harness for it to work. I know, i tried it, and if you look in the FSM it lists two different diagrams. One for the GA and one for the SR. I did this personally, pick up a B14 SER cluster and plug it into any GA B14 and it will not work.

If you wanted you could pull the pins and rewire the connectors and i would think it would work just fine.

I am not sure if the 93.5-94 B13's are the same but i know this is true for the B14's.

i was not trying to make it seem like a big deal i was just saying that thoes years came with electronic speed sensors and the 91 to early 93 sentras came with manual speed sensors.. the more correct info on the forum there is the better!!

The cluster harness question has been answered, and thank you squirlz.

Jen, there's no need to argue or be rude/pushy. Read both of the VE FAQ's. They both state that you "REWIRE" the VE distributor for the B14. All that I need is the wiring diagrams, which you obviously do not have or have knowledge of. I appreciate your attemp at helping me on this, however, I just want the diagrams if anybody has them.

who is being rude when people are taking my words out of context and i stated that i was not trying to be an ass...and i actually do have the diagram ... i told you were to find your answer and you still have not looked.... ASK ANDREAS MIKO he is all over the place and pretty much the VE expert his number is on his signature..

http://www.sr20forum.com/sr20ve-sr16ve/234701-help-sr20ve-distributor-wiring.html.

http://www.sr20forum.com/sr20ve-sr16ve/22714-de-ve-distributor-wiring.html

Thank you. I appreciate your help on this. And I appologize for any misunderstanding between us.

its all good man