Thread: just bought a B13 and . . .

diving it home it seemed very lacking, when you WOT it, it just doesnt seem like its all there, had a code that i pulled out of it with consult, and the code was injector leak but it said 0 next to it like it was still a pending code. any help with this would be greatly appreciated, also i have not had time to look at how the oil is or anything at all since its at my work and its closed now. just drove it there and left. also it has about 180k on the clock if that helps any, thanks any help would be greatly appreciated

does the engine stumble at idle?

no, it idles perfect, well a little high but very smooth

compression test it. If it's all in the 160ish+ range and close to each other you probably just need to buy a CAI from me...

GA16 powered B13s came like that from the factory.

^^^huh?

If U Think Its A Bad Injector... Pop The Hood While Car Is Running. Unplug Each Injector Connector One By One. If The Injector Is Fine When U Unplug It U Will Hear The Engine Drop Rpm's And Power, If The Injector Is Bad When U Unplug It The Engine Will Do Nothing. That's The Bad One. If U Have A Bad Injector That Is. G'luck

lol



that one just flew WAYYY over your head didnt it.

1.6L of fury!

"Jeez that SR in there looks kinda small..."

its an SR20, and the idle is very smooth so i would doubt its an injector but i guess its worth a shot to try