Main Bearing question
Hello I had bought king standard bearings however my clearances are around .014in which is huge. Even with .25mm oversized it will still be out of spec do I have to get a new crank or are there over oversize bearings that I am unaware of? All the research I've done points to no bigger then .25mm over. Crank is about 2.154in. If it sounds stupid I'm sorry I am inexperienced. Thank you for your time
Edit:
Okay just did some more research and found that there are .50mm bearings but that would be too big and I would have to grind the crank journal. Anybody have experience with using such big bearings? Any longevity problems?
Edit:
Okay just did some more research and found that there are .50mm bearings but that would be too big and I would have to grind the crank journal. Anybody have experience with using such big bearings? Any longevity problems?
Last edited by TacomeatFijiwater
on 2024-10-28
at 01-17-29.
Be the first to like this post.
Back to top
