Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Time for all new hoses - Master Kit?

+ Reply To Thread
Posts: 1-5 of 5
2016-08-28 02:10:42
#1
Time for all new hoses - Master Kit?
As part of my engine rebuild I plan to replace every hose that carries coolant and every hose that carries fuel in the car. Is there a master hose list from Nissan or an aftermarket company that has a hose kit?
2016-08-28 14:22:19
#2
Don't discriminate against the Vacuum lines!

VACUUM LINES MATTER!!!
2016-08-28 16:21:04
#3
No master kit. Just need to go through the FAST catalog and pick out all the ones you need. Also inspect the metal pipes for corrosion and replace them if needed.
2016-08-28 18:48:13
#4
Technically there's nothing special about the small fuel hoses. They aren't molded, so you could just get a length long enough and cut your own. You won't get some of the fancy braided plastic protection that the stock hoses by the fuel tank have, but you could make due otherwise.

If you want to go OEM, here is a thread, a post, and some images with part numbers to help you do the stuff by the fuel tank:

All rubber hoses that touch the fuel tank

Replacing all main fuel hoses by fuel tank

https://scontent-mia1-2.xx.fbcdn.net/t31.0-8/322678_10150662563300100_2146573963_o.jpg (Large tank filler tube)
https://scontent-mia1-2.xx.fbcdn.net/t31.0-8/329634_10150662563510100_305740427_o.jpg (Smaller tank vent tube for 1994, may be different for other years, see first linked thread.)

https://scontent-mia1-2.xx.fbcdn.net/t31.0-8/328273_10150662564495100_796596371_o.jpg (High pressure engine feed and return lines by the tank.)
https://scontent-mia1-2.xx.fbcdn.net/v/t1.0-9/417529_10150662564660100_96179613_n.jpg?oh=ad723824bd5bb4efa7975b6b964de979&oe=5848C65F (Same as above)


I didn't go all the way and replace the short plastic red pipes to and from the charcoal canister check valve. You're on your own there.
Last edited by BenFenner on 2016-08-28 at 18-50-38.
2016-08-30 13:25:33
#5
Originally Posted by BenFenner
Technically there's nothing special about the small fuel hoses. They aren't molded, so you could just get a length long enough and cut your own. You won't get some of the fancy braided plastic protection that the stock hoses by the fuel tank have, but you could make due otherwise.

If you want to go OEM, here is a thread, a post, and some images with part numbers to help you do the stuff by the fuel tank:

All rubber hoses that touch the fuel tank

Replacing all main fuel hoses by fuel tank

https://scontent-mia1-2.xx.fbcdn.net/t31.0-8/322678_10150662563300100_2146573963_o.jpg (Large tank filler tube)
https://scontent-mia1-2.xx.fbcdn.net/t31.0-8/329634_10150662563510100_305740427_o.jpg (Smaller tank vent tube for 1994, may be different for other years, see first linked thread.)

https://scontent-mia1-2.xx.fbcdn.net/t31.0-8/328273_10150662564495100_796596371_o.jpg (High pressure engine feed and return lines by the tank.)
https://scontent-mia1-2.xx.fbcdn.net/v/t1.0-9/417529_10150662564660100_96179613_n.jpg?oh=ad723824bd5bb4efa7975b6b964de979&oe=5848C65F (Same as above)


I didn't go all the way and replace the short plastic red pipes to and from the charcoal canister check valve. You're on your own there.


Sweet! Thanks buddy!
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top