Thread: Which mark is TDC on this crank pulley? (2001 fwd SR20DE)

The spark plug wires weren't put back on the distributor correctly! I know the engine turns clockwise but didn't even realize, how the motor book shows a counter clockwise arrow, and didn't pay attention when I removed the wires from the cap. I was setting the firing order backwards. We figured that out and it started right up and runs great! I like the cams, a lot of usable power through the whole rpm range. I found that the factory RR cams seemed to have a lot of low end pull, and I don't know if it matters that the engine was from an automatic 2001 sentra, but it had torque like right from the idle and not as much power in the higher range. Now it screams and pulls right to 80+ easily.

Thanks for helping, everyone

Lol. Have been there before years ago. Had to pull all the plug wires off and figure out which was which by longest --> shortest. Or go by trial and error. Glad everything is running!