Welcome to the SR20 Community Forum - The Dash.
SR20 forum logo

Thread: SR20DET FWD AND RWD crankshaft flywheel interface

+ Reply To Thread
Posts: 1-3 of 3
2016-03-11 09:38:24
SR20DET FWD AND RWD crankshaft flywheel interface
For a Renault/Nissan engine Swap i was looking for a flywheel to fit.

And the RWD sr20det flywheels seems to fit, so can any tell me the PCD and nose diameter ?
and the outer diameter of the SR20det flywheel ?

On my FWD SR20 i`ve got 8 hole PCD 66mm Bolt interface. and a nose diameter of 43mm:
Like this

and i saw some RWD SR20det with a 6 hole pattern, is the PCD of the RWD SR20 also 66m and the same nose diameter ?
if the outdiameter is below 320mm that would be great.
2016-03-14 09:03:26
I well i have used a rwd crank on a fwd before with noo issue so to me they are the same

Sent from my SM-N920P using Tapatalk
2016-03-14 13:49:32
The FWD and RWD cranks are identical. I actually run a FWD crank in my RWD S13 SR20.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)

    Back to top