Welcome to the SR20 Community Forum - The Dash.
SR20 forum logo

Thread: Installed my 3" SS BRM Catback (P10 SR230VE): Video with Fitment and Sound

+ Reply To Thread
Posts: 11-16 of 16
2016-02-08 03:51:30
That's a sweet car.

Pardon me if I sound stupid or I'm not paying attention close enough, but I couldn't hear the cam changeover. On my last VE car (years ago) it was pretty distinct, and that's when the exhaust really hummed.
2016-02-08 14:27:10
You're right, there was no cam changeover. Not only did my brother (who was driving in the video) not take it into very high rpm, but I have been having changeover issues which I haven't had enough time to dig into, lol.
2016-02-08 15:02:36
Are you using a window switch or trying to switch from a ecu?

Sent from my SM-N900V using Tapatalk
2016-02-08 15:39:35
I am currently using an AFC NEO to do the switching, but considering moving to the window switch. I am running a JWT OBDII B14 ECU remapped for the VE. I did not get their VVL switching add on because I wanted to control the point where it switches. I currently have it "set" for 5k, but obviously nothing is happening. 1 solenoid is new, the other is the original. I need to check for voltage, but I haven't had time yet. When I swapped the motor in, I cleaned out the VVL block and filter, so I doubt those are clogged, but who knows at this point, ha ha.
2016-02-08 16:16:56
Ah well if you need some solenoids to trouble shoot, let me know! My car is down for awhile so no problem lending anything that may help

Sent from my SM-N900V using Tapatalk
2016-02-08 16:35:34
I appreciate it! I'm leaning towards the Neo or I missed the wiring a bit originally. But I'll give ya a holler if otherwise!
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)

    Back to top