Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: SR20VE header

+ Reply To Thread
Posts: 1-7 of 7
2015-08-05 18:40:54
#1
SR20VE header
Hi guys I need some advice I want to have a header fitted but don't know which is best[img][IMG]http://images.tapatalk-cdn.com/15/08/05/5cdf077608e9e691d71f7563199d4a32.jpg[/img][/IMG]

Sent from my SM-N915F using Tapatalk
2015-08-05 19:57:55
#2
personally I don't trust ebay ads that say taco taco

the differences in build quality should be quite evident. first picture > second.
2015-08-05 22:07:58
#3
I had an eBay header on my old de it was good and disn't have problems with it, I'm going to use it for my ve swap for now till I can get a better header

But if u had the cash definitely get the first pic
2015-08-06 00:22:06
#4
getting a header based off of a picture isnt the best way to go about buying one. need to know your specs on the motor to give advice
2015-08-06 00:35:57
#5
Originally Posted by morgans432
getting a header based off of a picture isnt the best way to go about buying one. need to know your specs on the motor to give advice


recommendation isnt based on picture alone. there is plenty of supporting information as to why its superior in every aspect, but the main limiting factor usually comes down to budget. $1000 vs $100 is a big difference.
2015-08-06 06:15:55
#6
Ok thanks guys I'm in SA and will be doing a ve top on a de sub assembly with port and flow work on the head thanks for the advice, lastly I was told the first pic has better sound qualities? Is that a myth?

Sent from my SM-N915F using Tapatalk
2015-08-06 09:28:07
#7
the left one is from armonic performance on f/b .24?" 1 3/4 primarys with 2 1/2 choke. . i know a few guys that run them. the right side are ssac type. given the choice, i'd go with the left ones, but ask about fan clearance. it should show good gains over ssac's, especially if your putting in n1 cams.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top