Thread: Just want to clarify some things sr20ve swap b14 se-r

What's up guys I'm going to be ordering my sr20ve within the week and just wanted to clarify some info before I begin my swap

Since I'm using my de harness with the swap do I have to use the de injectors?

Some people say I have to use the de injectors and MAF since I'm going to be using the de ecu for now and some people say using the ve injectors is ok with the de ecu (and I know I have to buy a window switch for neo activation)

use the de injectors and maf and save up for a nismotronic daughter board. once you have this its easy to change things and change the basemap/maf/inj to suit whatever you want to run.

Yea that was the plan till I get extra money for a nismotronic and tune, but I just wanted to be sure because I read posts that are back and forth saying u can use the ve injectors then people say no you can't.

It shouldn't matter if I'm using my 94 g20 ecu that's in my b14 now because it's still an de ecu

Use de injectors and Maf. The ecu is not programmed for anything else. I'm sure you could limp along with ve injectors but without a tune or safc or similar, it's going to run rich

and I take it as I use my flywheel and bolts from my de because the ve's had an auto

yes you can. or buy a lighter one (fidanza/action) etc