Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: This is going to be my dumb noob questions thread

+ Reply To Thread
Posts: 61-70 of 113
2015-07-31 17:27:12
#61
Kill that annoying buzzer, please.
2015-07-31 18:57:19
#62
This is going to be my dumb noob questions thread
Originally Posted by Char
Kill that annoying buzzer, please.

Oh that thing was driving me nuts ALL day... and since I can't roll the windows down I took the t-top off earlier in the day (& because it was hot too).
But this was the last try of the night so the top was back on.
We definitely know the buzzer works though I would gladly change it out with something that didn't in a heartbeat.
2015-07-31 23:50:16
#63
Engine Help needed
Found this old thread... of course as it usually goes- NO REPLIES
Sounds like he was having similar issues (too bad no one helped him out with it).
B13 jdm Dizzy help - SR20 Forum


My video again, since we're on a new page:


NEW:
Sparkplugs, wires, fuel pump & filter.


Used from the OBD1 engine:
-dizzy & it's harness
-ignition coil
-power transistor
-obd1 injector harness w/ the obd2 injectors
-obd1 CST
-obd1 TB




Checked:
Timing seems to be on point.
Coil is good, timing chain is tight, rotor & dizzy cap look good.
Don't know if the dizzy shaft would cause any issues (still is the OBD2 shaft but the OBD1 dizzy fit right into it).

Remember this is:
OBD1 wiring/harness & OBD2 engine.
Last edited by MudPuppy on 2015-08-01 at 00-08-09.
2015-08-01 09:17:23
#64
lets see your engine grounds. how do you have your sparkplug wires? take a plug out 1 by 1 and ground it to the valve cover to make sure spark is consistent on all cylinders.
2015-08-01 13:52:51
#65
At work currently.
Sparkplugs are gapped and 4-3-2-1.
2015-08-02 00:13:01
#66
1342!

Pics of dizzy and correlating cylinders please!
2015-08-02 01:49:20
#67
Originally Posted by zeneffect
1342!

Pics of dizzy and correlating cylinders please!


Yeah, (home now & w/o the extra distractions) and see I did make a mistake (in above post) on the order now.
Do have it at 1-3-4-2 and when I got home we checked the plugs pulling them out 1 by 1 and grounding them on the VC, all had consistant spark.
Then after that it just fired up & ran.... so maybe 1 was overtightened or something unplugged itself, I dunno (Curse of the Chupacabra).
2015-08-02 02:27:44
#68
So it lives and idles?
2015-08-02 02:48:01
#69
Originally Posted by zeneffect
So it lives and idles?

IT's alive! And idling, though we might need to finesse the idle some to get it smoother.
Posted video link in my ride thread & in the chat for your convenience.
2015-08-02 17:40:31
#70
So does this mean it's the end or the beginning of the dumb noob questions lol!
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top