Back at it again...
So I put together an avenir block with a n/a low port head. I got it to start but it won't idle with 0 vacuum leaks. Also it overheats to quickly. The valve cover gets super hot in a matter of 20secs or less(mind you it won't idle unless I keep spraying starter fluid). I think I might have coolant back pressure somewhere. Does anyone have a diagram for coolant flow or hose locations? The only one I found was the rwd sr. I wanna hit the overheating issue first so any feedback helps. I wanna check for back pressure before I change the water pump. As far as the idling issue I'm not to worried about at this time. Thanks!
** almost forgot to mention t25 is attached with oil cooler,and mishimoto cooling parts.
Driving and posting is not illegal!
** almost forgot to mention t25 is attached with oil cooler,and mishimoto cooling parts.
Driving and posting is not illegal!
Last edited by LpSR20DET
on 2015-03-03
at 07-44-48.