Thread: Excessive plenums?

So I been meaning to buy excessive plenum for my build and I wanted to buy the sr20ve n1 plenum but production on the n1 runners have ceased. I been looking for them but no luck so my alternative is to go with the excessive 20v plenum I have a sr20ve (p11) so know the 20v has bigger ports but is the bolt pattern the same for the runner as the reg VE ?

if your usa based, why not get xcessive to make you up their custom runner'd plenum like this one.

[URL=""][/URL]

couple of benefits..
1. you get decent diameter runners. unported n1 are small.
2. there better spaced. n1 number 2 & 3 bellmouths are close together.
3.there all metal. few stories of the bellmouth's coming apart on the plastic spacer, and sealing issues.

or maybe look at a custom gato plenum to suit your ve.

[URL=""][/URL]

everyone who's someone seem to like these.

Deff sounds like a good option I deff will look into that thanks

The options listed are the best, in answer to the initial question, yes the bolt pattern is the same for the P11 VE & the 20V.

No the 20v plenum and p11 plenum have different bolt pattern

Didn't Andreas Miko have a thread a while back about the gasket for the plenum to runners on each are the same? Sure there are pics of a P11 VE plenum fitted to the 20V runners. I remember the thread.

The vet and p11 are not the 20v

Just read the thread, my bad. It's the VET & the P11 VE that share the same bolt pattern for the plenum to runners. Thanks pTen. BTW Kyle in AZ says hi ☺

Well I had tried contacting gato performance to inquire about their intake mani but no response at the phone or email so I went the another way that I looked into now just waiting till April/May when I hopefully finish my build