Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Did I break it??

+ Reply To Thread
Posts: 11-14 of 14
2014-12-19 13:49:35
#11
The coolant does not EVER touch bearings, period. The sealed bearing is just that, sealed. It has its own grease and is sealed on both ends to prevent outside contaminant such as coolant, dirt, etc from entering. When a water pump starts weeping out the weep hole that means the water has made it passed the seals and making out to the weep hole, and possibly "washing" away the grease. Coolant will act as a heat sink to pull heat from the bearings through conduction. Over tightening of the pump belt will put more load on the bearings and generate more heat. You will be surprised how long you can operate a part on a sealed bearing with no cooling means.

Coolant is NOT a lubricant for metal parts or rotating parts.
Last edited by NissanEgg on 2014-12-19 at 13-50-36.
2014-12-19 13:55:14
#12
Thanks for elaboration on your first clear and simple post.
2014-12-19 19:01:59
#13
Thanks for all the feedback guys...the engine appears to be ok.

I filled up the cooling system, and let it idle until the fans came on and went off a few times, then took it for a rigorous test drive, not a hiccup. Checked the oil, and all looks good! Now on to the next adventure!
2014-12-21 22:35:53
#14
Originally Posted by Benito
You may be in the clear and alright engine-wise, but it is possible the water pump may have been damaged from running dry.

^this.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top