Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: changed rear struts now have chatter noise.

+ Reply To Thread
Posts: 1-10 of 21
2014-10-30 05:00:31
#1
changed rear struts now have chatter noise.
Hello everyone, I just replaced my shocks all the way around. Noticed a jingling noise kinda like change in the trunk lol.
2014-10-30 15:31:24
#2
did you check for change in the trunk?
2014-10-30 17:01:45
#3
Upper strut mount? Loose hardware?
2014-10-31 04:17:40
#4
Ok so ive double checked the hardware and there is a gap at the top when under load. Theres a gap beetween the upper rubber bushing and the large washer that holds the strut to the mount.
Last edited by b14 mexicutioner on 2014-10-31 at 04-18-56.
2014-10-31 11:54:02
#5
Originally Posted by b14
Ok so ive double checked the hardware and there is a gap at the top when under load. Theres a gap beetween the upper rubber bushing and the large washer that holds the strut to the mount.


take them back off and tighten the top of the strut mount.
2014-10-31 12:01:28
#6
Thats as tight as they would go
2014-10-31 14:19:38
#7
you should just try taking them off and reinstalling them before you drive your self nuts
2014-11-03 23:55:16
#8
...and then report back!
2014-11-04 19:38:39
#9
What is the setup?
2014-11-04 19:41:20
#10
What'd you use to tighten the shaft nut? disassemble/reassembly and hit the top nut with an impact
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top