bad coolant temp sensor or the wrong one.Like if you did a jdm engine swap,you need to swap your CTS in...I just had this problem.Installed a new Nissan one and fixed.
Need a tune? Contact me, I offer Dyno, Street, Remote, E-Tunes and base maps. I work with Calum, Nistune, Nismotronic, AEM, Haltech, Crome, Hondata, E-Manage, TunerPro and can work in other programs as needed. I can also burn chips and ship them as needed. ETPerformance772@gmail.com or PM
Originally Posted by eggman bad coolant temp sensor or the wrong one.Like if you did a jdm engine swap,you need to swap your CTS in...I just had this problem.Installed a new Nissan one and fixed.
fan still comes on after swapping them out. is there anything else could cause this?
Join Date: 2013-01-05 Location: norther WEST virginia Posts: 279 Trader Score: 0 (0%)
mine does the same thing, temp gague reads properly, the fans kickin on right away makes warm up take forever, runs fine otherwise, Im just gonna put an inhibitor relay in with a red led when its engaged.
Originally Posted by eggman bad coolant temp sensor or the wrong one.Like if you did a jdm engine swap,you need to swap your CTS in...I just had this problem.Installed a new Nissan one and fixed.
fan still comes on after swapping them out. is there anything else could cause this?
bad ground,or bad ecu as stated.
Did you use a brand new ,or known good sensor?
Teflon tape on the threads can cause a bad ground ,from what I have read .Dont know if its true or not....However ,I never use it and havent had any leaks or issues.