Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Discovery of a VET/20V COP alternative that fits properly..

+ Reply To Thread
Posts: 31-39 of 39
2015-02-02 00:11:04
#31
What valve cover are you using on your setup?

Originally Posted by ebinkerd
@LANCESR20 Granted they fit, but they are not long enough. Unless you are using a coil that is longer version. The part numbers supplied are for the coils that are the same length as the rwd sr20det coils, which are too short for fwd application. If you can take a measurement for me, that would be great. Ill post what I have.

- - - Updated - - -

In my case, these are about 1/2" too short.
2015-02-02 00:54:29
#32
Originally Posted by Kleensleeper
What valve cover are you using on your setup?



p12 20v.
2015-02-02 16:15:07
#33
Originally Posted by LANCESR20
They make contact just fine for me in a fwd det motor length wise. There are three or more different coils for the matrix, corolla and celica.


As it stands, the applicability of these coils is unknown. My 1zz coils do not come close to making contact. I'll provide my measurements tonight along with the part number.
2015-02-02 23:08:10
#34
SR20 NGK wire, 1zz coil
These are not the same length.

2015-02-03 12:41:26
#35
Originally Posted by LANCESR20
I



olt.


Originally Posted by ebinkerd
SR20 NGK wire, 1zz coil
These are not the same length.



There is a slight difference b/t his and yours... What year/model did you get?
2015-02-03 14:32:32
#36
Originally Posted by unijabnx2000
Originally Posted by LANCESR20
I



olt.


Originally Posted by ebinkerd
SR20 NGK wire, 1zz coil
These are not the same length.



There is a slight difference b/t his and yours... What year/model did you get?


90080-19015

Slight is correct. However, in the pic you used as reference show a s13 coil, which is known to be too short to be used in fwd application. Here are two links that show which engines either part number is applicable. So if both part numbers fit the same motors, how could there be two different lengths. I've already tested p/n 90080-19015, and it is too short.

90080-19015 - Genuine Toyota COIL ASSY, IGNITION

90919-02239 - Genuine Toyota COIL, IGNITION
Last edited by ebinkerd on 2015-02-03 at 14-39-40.
2015-02-24 02:12:14
#37
So which coils can be used on RWD SR as well as p11 VE with p11 VC?

Need some clarity here cause Lancer I believe for the most part has the coil I need!
2015-02-24 20:29:18
#38
Originally Posted by Jybfan04
So which coils can be used on RWD SR as well as p11 VE with p11 VC?

Need some clarity here cause Lancer I believe for the most part has the coil I need!


Can you clarify what setup you need coil packs for?
2015-02-24 23:41:02
#39
Currently run a S13 SR20DET, but have a P11 VE head going on when I can fund the project!
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top