Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: P0325 Question

+ Reply To Thread
Posts: 1-3 of 3
2014-09-11 02:19:28
#1
P0325 Question
Hey guys,

I had 3 codes, but only 2 triggered my CEL. The 2 codes were for my rear O2 sensor, which I have just replaced. My CEL has been off ever since, but when I check my ECU it still has P0325, which I read does not trigger the CEL. I was told that a tune up might fix the code and I am well overdue for one, but is there any truth to that? The FSM doesn't mention anything about a tune up to get rid of the code.

My car doesn't feel to be in limp mode since I can still redline and the speed doesn't seem to be restricted.

Thank you!!
2014-09-11 03:01:55
#2
It's just a faulty knock sensor. As you said, it doesn't trip the MIL. You can clear it and it may or may not come back right away. It will come back eventually though. I've seen many P11's with this code. Either replace the sensor or just live with it. It isn't a big deal usually. If your car runs well and all of the maintenance is up to date (and the timing is verified), I wouldn't worry about it. They can stay on for years without issue.
2014-09-25 03:54:00
#3
I think I'll replace it so I can get rid of that code

Thank you!!
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top