Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Reinstalling Transmission, But I Have Some Questions

+ Reply To Thread
Posts: 11-19 of 19
2014-07-01 22:23:38
#11
On a side note, make sure the transmission still has it's dowel/alignment pins on the bell housing...bad things happen to clutches when those are missing!
2014-07-01 22:34:15
#12
I called Infiniti and the only thing he sees are 2 clips, but he did say that in his system they are referred to as springs. He said that those are the only clips/springs in that area.
Last edited by David99G20T on 2014-07-01 at 22-35-32.
2014-07-01 23:26:39
#13
It should look like this but cleaner, not rusty, freshly lubed, etc...



Taken from HOW TO: P11/B15 transmission swap into a B13/B14/P10 - SR20 Forum
2014-07-01 23:39:07
#14
@Kyle, I'm almost positive he doesn't need those roll pins. If I am understanding his posts correctly.
@David99G20T, odds are the roll pins (those arrows in the image above are pointing to them) are just fine and dandy. You're likely looking for the clips that hold the TOB to the clutch fork. Not the roll pins that hold the clutch fork to the clutch pivot shaft. The clips... Let me point them out...


Last edited by BenFenner on 2014-07-01 at 23-43-59.
2014-07-02 00:44:09
#15
Re: Reinstalling Transmission, But I Have Some Questions
Originally Posted by BenFenner
@Kyle, I'm almost positive he doesn't need those roll pins. If I am understanding his posts correctly.
@David99G20T, odds are the roll pins (those arrows in the image above are pointing to them) are just fine and dandy. You're likely looking for the clips that hold the TOB to the clutch fork. Not the roll pins that hold the clutch fork to the clutch pivot shaft. The clips... Let me point them out...



Correct. I was referring to the TOB clips. My tranny has been to 2 shops and I have a box with parts from one of the shops and I'm worried that one of the shops has lost those clips, because they're no longer in the tranny. Luckily my local Nissan dealership has the clips in stock.

Thank you all for your help!
2014-07-02 00:52:00
#16
Re: Reinstalling Transmission, But I Have Some Questions
Originally Posted by BenFenner
@Kyle, I'm almost positive he doesn't need those roll pins. If I am understanding his posts correctly.
@David99G20T, odds are the roll pins (those arrows in the image above are pointing to them) are just fine and dandy. You're likely looking for the clips that hold the TOB to the clutch fork. Not the roll pins that hold the clutch fork to the clutch pivot shaft. The clips... Let me point them out...



Correct. I was referring to the TOB clips and not the roll pins. My tranny has been to 2 shops and I have a box of parts so I wanted to know what goes there since the TOB and clips were left off. Just wanted to make sure I don't leave anything out when I reinstall it.

Thank you all for your help!!
2014-07-02 01:07:10
#17
We did it @BenFenner !
2014-07-02 14:17:23
#18
No pics of the dowel/guide pins?
2014-07-02 16:34:56
#19
Here's a few pictures showing where they go.

Top-right dowel in place. Bottom-left dowel missing.



Top-right dowel.



Bottom-left dowel.



Both dowels in place but the top-right dowel is hiding behind the spacer plate.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top