Thread: Can This Part Of My Transmission Be Repaired?

Is that the cover I have a picture of in the first post? Because it's slightly damaged and I'm not sure if it can still be used.

Thank you!!

Was this the transmission for sale a while ago or another one?

No, this transmission was never listed for sale.

Yes The Same One From The Pic.. if the P11 cover is damaged the only way around it is buying another 99 p11 trans.. reason being that you have A P11 chassis.. unless you could source A 99 P11 cover by itself..

The 99 P11 transmission has the same mounting as the B13/B14. The '00+ use the top mount like the B15. The only issue would be the '94 transmission won't have the hole for the crank angle sensor in the bellhousing, but that can be added.

are you sure about that?? if I'm not mistaken all P11 Trans use the top trans mount..all p11 transmission indeed have the same mounting points as the B13, but he has A P11 chassis which will require the top mount which the b13 transmission doesn't have the mounting points for.

however the P10 transmission doesn't use the top mount maybe you're getting them mixed up since the 99p 11 is still a 32V box..

find a new trans....@ least a 99 p11 is a direct swap, since it has provisions for mount configs.

in terms of the outter case....thats where 1 of the shaft bearings sits. Im willing to bet that since that is marred there...the oppsing side is as well. (id remove that & have a look)

a similar thing happened to me with a trans. the inputshaft bearing went completley & thus caused the shaft to have play in it, & the top/case side was also messed up..

i had a buddy fix the motor side, but he couldnt get in the outter case to fix that side, so i got a new outter case

'99 P11 transmission: http://www.sr20-forum.com/driveline-fs/74208-1999-infiniti-g20t-lsd-tranny-transmission-converted-cable.html

if you read the description it clearly states that the transmission was in a 94 b13 Not A P11... like I said before you could bolt any p11 transmission on a B13 Or B14, but not a b13 or b14 transmission on A p11... also take a closer look at the picture and you could clearly see the mounting points for the top mount... I'm not trying to give misleading information.. just talking on experience since I rebuild these transmissions all Day...

also you could go on eBay and find the transmission mount and you will see it does not look like the 3 bolt one from the front cover