Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Torquing/re-torquing cams

+ Reply To Thread
Posts: 11-15 of 15
2014-03-24 21:33:00
#11
Originally Posted by 93specv
Oh I def went in sequence and I turned each bolt in sequence maybe a 1/4-1/2 turn at a time, if that! I went super slow, super steady, and super even...in order, over and over and over till they were finally snug.


As mentioned previously, probably can't hurt to re-torque per FSM.
For reference, here's the procedure:


Link to larger image:
http://farm9.staticflickr.com/8396/8678290288_deb8377dce_o.jpg
2014-03-25 01:57:50
#12
I think I may put the torque wrench on the bolt heads and see if they turn any more, or just clicks. I'm Super hesitant to loosen everything up...probably half the reason it took 5 years to inquire, ha!
2014-03-25 22:39:50
#13
they would of broken already if they werent right. you can do these by feel just like you did making them tight
2014-03-26 01:27:08
#14
30,000 miles w/o problems, don't touch them.
2014-03-26 01:58:09
#15
If it ain't broke, don't fix it!
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top