Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Rear window tint removal - I need tips!

+ Reply To Thread
Posts: 1-6 of 6
2014-03-06 17:12:17
#1
Rear window tint removal - I need tips!
I removed the tint off my rear window on my NX with a steam machine and it left a second layer of film that wouldn't come off? I don't want to scrap it off with a razor blade because I don't want to remove the defrost element. Any tips?
2014-03-06 18:56:12
#2
call my buddy @Tearoffguy Larry his # is 352-390-703two. He is the owner at Ocalatint.com
Tell him you are a forum member and I gave you his # he will tell you how to save the defrost lines.I have seen him do it many times,and there are a couple good ways.
Jay
2014-03-07 02:41:03
#3
that secondary film is probably the glue + soap. a little goo gone should get rid of it. spray, let it soak a lil, wipe it off with a soft cloth.
2014-03-07 03:14:58
#4
Deionized water and some plastic will remove the tint. Acetone will remove the glue.
2014-03-07 05:00:51
#5
From Tearoffguy himself
http://www.sr20-forum.com/interior-exterior-dressup-audio-security/30599-how-remove-window-tint.html
2014-03-08 12:40:41
#6
For removing adhesive left behind from tint or vinyl I use Rapid Adhesive remover and a plastic scraper. Spray on the remover, let it sit for 10 min and it will come right off.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top