Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Engine build question.

+ Reply To Thread
Posts: 1-4 of 4
2014-02-09 22:01:20
#1
Engine build question.
I have another det block with mains ..will I have issues if I use my old det crank from a different block? Planning on getting acl race bearings.

Sent from my SCH-I545 using Tapatalk 2
2014-02-09 23:59:36
#2
Any sr crank, except the gtir, will be a direct swap into any other sr block. The only thing you need to do is check the bearing surfaces of the crank to make sure they are within oem tolerances. If they are, then std size acls will be what you need. If the crank isn't in spec then you'll need to get it turned and use undersize bearings according to how much was taken off.
2014-02-10 01:09:09
#3
Re: Engine build question.
Originally Posted by tswii
Any sr crank, except the gtir, will be a direct swap into any other sr block. The only thing you need to do is check the bearing surfaces of the crank to make sure they are within oem tolerances. If they are, then std size acls will be what you need. If the crank isn't in spec then you'll need to get it turned and use undersize bearings according to how much was taken off.


Oh ok. Thank you

Sent from my SCH-I545 using Tapatalk 2
2014-02-11 13:44:24
#4
Ditto
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top