Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: '95 P10 mounts the same as B13/B14/NX?

+ Reply To Thread
Posts: 11-18 of 18
2013-12-04 19:34:13
#11
Sorry when I said stock mounts I meant "new, stock mounts".

Thanks for the info.
2013-12-05 05:12:32
#12
Quote I found elsewhere; part numbers are for prothane mounts:

Front and rear bottoms for P11, and bottom rear for P10
14-502's are the 2 piece design
14-504's are the 1 piece design


14-505's fit the passenger side mount, I believe they fit the transmission mount too, but need to be cut and modified to fit.
2013-12-27 19:14:05
#13
Bumping this back up as I am ready to purchase the mounts. So I plan on purchasing OE style mounts for the front & passenger side, then inserts for the rear and left (trans) mounts which I will get the shells from the scrap yard when I am there to grab the cross member and shifter parts.

Just to confirm, I need the following for the REAR insert: 14 504 Prothane Motor Mount Insert Infiniti G20 Nissan SE R Spec V | eBay

Transmission insert will take modification? What about buying an OE style mount and filling it?

Also, I am seeing an OE style new passenger side (motor) mount for $25 shipped, do I take a chance with that or should I stay away? That's a lot cheaper than Rock Auto or my employee discount through Worldpac.
2013-12-27 20:33:07
#14
DMSentra sells an awesome kit, i would invest in those because they fit perfectly. I made a front mount by cutting down a prothane, but i can not remember which one it was. The info is on G20.net.
2013-12-27 20:38:57
#15
You can also fill your own mount with liquid poly and let it harden. Energy suspension sell it.
2013-12-27 20:47:30
#16
Posted about the DMSentra mounts on G20.net.
2013-12-28 18:14:31
#17
I went ahead and bought the DMSentra mounts for the rear crossmember and the transmission. Then bought an OE style passenger side mount off eBay for $23 shipped. Still trying to figure out to do with the front mount. I still have to hit the scrap yard for a few more parts, so if the front mount on that car is in good shape I'll just use it for now.

Thanks for the help guys. Project is coming along nicely.
2013-12-28 19:49:33
#18
You can buy the OEM insert for relatively cheap. It is just a piece of rubber that goes into the front U-shaped shell of the cross member.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top