Thread: eManage blue settings for z32 MAF?

I have a friend with a built KA-T, and he just installed his z32 MAF last night, changed the eManage Blue dials to 2 0 1, and now the car doesn't want to run. I have a feeling he hooked up the MAF incorrectly, or didn't run separate grounds to the IM for the MAF.

Does anyone here run eManage blue, with a z32 maf? Would you agree with the dial settings?

He's coming by tonight to try my MAF, but I want to make sure that his is defective, or wired incorrectly before I put mine on there and fry it too.

It's wrong, he has to set the dials to 2 - 0 - 6, then on the emanage software, go to the hotwire settings and pick NS_HW_2 from the list.

SWEET! Thanks bro.

Another question...

He says that the eManage is locked?! How does one go about unlocking it so that he can make changes?

If he doesnt have the password, he is pretty much f.ucked lol. There has to be a hard reset button somewhere on the unit. Let me check.

Okay, thanks. He confirmed with GReddy that he'd have to start with a fresh program, as they won't give him the password to unlock the unit. Gotta be SOMETHING out there.

BTW it IS an eManage Blue, not ultimate. Would this make a difference?