Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: eManage blue settings for z32 MAF?

+ Reply To Thread
Posts: 1-6 of 6
2008-06-03 16:56:51
#1
eManage blue settings for z32 MAF?
I have a friend with a built KA-T, and he just installed his z32 MAF last night, changed the eManage Blue dials to 2 0 1, and now the car doesn't want to run. I have a feeling he hooked up the MAF incorrectly, or didn't run separate grounds to the IM for the MAF.

Does anyone here run eManage blue, with a z32 maf? Would you agree with the dial settings?

He's coming by tonight to try my MAF, but I want to make sure that his is defective, or wired incorrectly before I put mine on there and fry it too.
2008-06-03 17:20:55
#2
It's wrong, he has to set the dials to 2 - 0 - 6, then on the emanage software, go to the hotwire settings and pick NS_HW_2 from the list.
2008-06-03 19:07:14
#3
Originally Posted by Bagato
It's wrong, he has to set the dials to 2 - 0 - 6, then on the emanage software, go to the hotwire settings and pick NS_HW_2 from the list.



SWEET! Thanks bro.
2008-06-03 19:18:50
#4
Another question...

He says that the eManage is locked?! How does one go about unlocking it so that he can make changes?
2008-06-03 21:30:48
#5
If he doesnt have the password, he is pretty much f.ucked lol. There has to be a hard reset button somewhere on the unit. Let me check.
2008-06-04 00:10:52
#6
Okay, thanks. He confirmed with GReddy that he'd have to start with a fresh program, as they won't give him the password to unlock the unit. Gotta be SOMETHING out there.

BTW it IS an eManage Blue, not ultimate. Would this make a difference?
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top