Thread: My little helper left the sr20 out in the rain after cleaning it, what to do?

It was half in and half out of the garage with the door left open. Plenty of water on the plug galley and I can see that at least a little got in the intake plenum (no TB installed). There may be some water in the intake runners.

I Need to get this swapped in my daily driver ASAP, should I just take the spark plugs out and crank it over a bit? Or, should I disassemble the runners, likely causing a week delay waiting for gaskets? But not risk causing any problems?

Thanks.

The leg of the engine stand slipped out when we were moving it and I had to gently lay the motor on the ground tipped up with the front facing down. I suppose the hydraulic lash adjusters need to be bled again?