Thread: B14 5MT driver's side axle seal part numbers

For those of you that have had (or may have) trouble finding the correct part numbers for the driver's side axle seal, here they are:

NISSAN - 3834231X02
FREIGHTLNR - CHR16594
BECK/ARNLEY - 0523563
PAYEN - NJ191
CR (Pep Boys) - 16594
NATIONAL - 710133
TIMKEN (Autozone) - 710133
NOK - BW4265E

Figured I'd post the information here as some outlets are selling the 4AT seals as equivalent to the 5MT, which is not the case.

The Pep Boys one, that is SKF brand, I have bought four sets from there and the box is green with SKF and Made In Japan written on almost every corner with the part number as you listed (#16594 for $18.99 for one driver's side seal) I have been happy with the seals that I keep buying them when in a pinch.

Other wise, you cannot beat G Spec for both here.

Thanks for that link! So the bigger seal is of course for the driver's side, and guessing the smaller is for the passenger. I had ordered my driver's side seal originally from NAPA, and what they gave me was the SKF 12912, the smaller seal. Now, when you check for the part description of that seal online, it explicitly states 'Left'. The Timken 710133 (large) is listed as 'Right'. So I'm guessing the side orientation comes from when you're looking at the transmission from the front of the car... which is a bit too confusing I guess not only for me but for the NAPA autoparts guy as well.

Picture I took this morning for the thread.



Once again, Greg V for OEM seals is cheaper. I use these when in a pinch.

Awesome, thanks man!