Thread: Replacing windshield washer tank.

Anyone know how to remove/replace it? I know mine leaks, can't fill it up all the way before I start to see the fluid coming out from under the car.

its a 2 piece bottle. there is the neck that comes up into the engine bay, you'll need to take off the passenger side wheel and remove the wheel house liner to get to the bottle it has about 4 bottles that hold it in. i believe they are either 10/12's either way the whole process should take about 20 minutes at the most. if you need a new one let me know i work @ a nissan dealership

Very easy to do - Remove the wheel and have at it. It isn't a big deal.

BTW, Depending on the crack you have, structural duct tape may work to get you by until you make it to the pick and pull or while you're waiting to get a new one shipped.

I would check the pump first, they can leak and those are a super easy fix. Just pull old pump out and pop new one in. You still have to remove the wheel well liner but then the pump is sitting right there. I have a used tank if you need one. $20 shipped if you would like and comes with the pump.