Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: OBD2 CAN or ISO?

+ Reply To Thread
Posts: 1-1 of 1
2013-06-24 11:35:24
#1
OBD2 CAN or ISO?
Ive ran into a bit of a problem. I have a 99 p11 with b14 rt. Now with the g20's, the ecu connector has to be repined for the b14 ecu to work. One of the step listed by UNISA JECS on the g20 site says to run two wires from the ecu to pins 6 and 14 on the obd2 port. It seems as if pins 6 and 14 is for CAN communication, while my p11 is setup for ISO. Now all the information I have found says that all nissans from 96+ uses ISO. Can some with a b14 look at there obd2 port and see which pins they have?

Here is a sample pic of how it is setup.
http://www.mbcluster.com/Media_Diagnostics/ODBII%20Master%20Pinout.jpg
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top