Thread: B14 Sr20de mount bracket broke

If anyone has a mount bracket for the b14 sr20 please let me know.

mount bracket for what??

Motor mount.

Come on man,I hate to sound like a dick,but if you want some help,you gotta be more specific.
Are you trying to give as little info as possible on purpose,or what?
There is more than one motor mount bracket.Rear/crossmember ,passengers side,and dogbone/crossmember.
I am in FL and have lots of parts,but I cant read your mind.
If you post a pic of what you need that would be really helpful...how did you break one?

nah its cool i was posting it while doing something else, that was my bad for not being specific.

That looks like the wrong bracket to me.I believe all the DE USDM ones are steel.That looks like an aluminum one from a sr20ve or another JDM motor to me.I have a couple of them off swaps.
They look the same at a glance,but the center bolt part is too high.
My best guess is that someone tried to mod this by grinding to "make it work"
That pic would be the result,because the middle bolt would be tight and the others would be under strain.

I say this from experience,because I tried the same thing(the steel one is way heavier,so I thought it would be good to reduce weight using the aluminum one)

I dont have a spare steel(correct one) but if you want to try to mod another aluminum,I do have one of those,but I wouldnt recommend it...for obvious reasons you have shown in your pic.
Hope that helps you out.I am no expert,but I have had alot of these cars over the years.

You need a USDM passenger mount bracket from a B13 or B14 (must be sr20,not 1.6L)

Thats right.

from the 3 i've seen lately, the 93 se-r had a steel one, but the 92 p10 an 94 p10 had aluminum.. i can double check the se-r and 94 p10 next time im at the shop just to be sure tho.

he has a B14. I meant B13/B14 USDM DE. I forgot about the G20s. Do the P10/P11 bracket work?Are they the same mount as B13/B14?