Thread: Top feed fuel rail install help

@gomba would you post pics of everything mounted when your finished installing, I'm getting ready to do this exact install. I'd appreciate it.

Ya I actually ended up getting them at autozone, but it's basically the same thing. It's called a 'fuel retainer clip'. Just search for clips from a '93 Pontiac Grand-am V6.



Sure I'll see what I can do.

Ready to go:

Thanks for the leg work. Goin this route soon.

Probably the best thing to do is make sure the rail is snug and angled correctly when you go to bolt it down to the manifold, but that's also why the clips are so important because it tells you how far down it needs to go.

My CS rail uses clips

You cant really see the clips but they are there. Youll also probably have fuel shooting out of one of the injectors and have to Adjust the Fuel rail brackets once or twice on your first instal. The "metal clips" are there to keep the injectors centered and not have one side of the injector pushing more on the rail...if that makes sense. The injectors will stay in the rail when you pull it any other time. The orings work well. This is a JWT rail also I was using

I wish the images weren't broken :'(

Ya looks like my imageshack account died or something. The clips were the first of the 3 posted above.