Thread: Help! my clutch pedal feels "crunchy" beyond annoying!

Pedal sticking to the floor is because the clutch lever return spring is not tight enough (clutch lever is not pulled enough) to pull the pedal back from the firewall. The clutch pedal, with nothing attached, will stay against the firewall because of how its spring works. It takes the spring inside the transmission on the clutch arm to pull it back up at least halfway until the clutch pedal spring can take over.

The TOB should have nothing to do with this.

That's correct, Ben knows his stuff. Throw out bearing is another issue

i had some engine assembly lube and worked it down both ends really good and now it feels fantastic! These cables suck....I broke one last year and had to get towed from out of state!

Geez last time i had a broken clutch cable I still drove home 10 miles stop and go and all!

Straight Gangsta! lol

I'm going to try lubbing mine's then, it doesn't get stuck at the bottom but it does feel like a spring issue inside the transmission, like if its not grabbing right... this might work, great post, 2 birds 1 stone

Lube it with a cable luber... Should sell it at a local bicycle shop. Took away that squeaky crap from my clutch PLUS made it 10x easier to push..


I had my clutch explode(basically the same thing, no clutch pedal lol) and drove 75 miles to my gf's house then 350 miles BACK home, now THATS straight GANGSTA! Lol through LA on a tuesday morning @ 6am :nightmare: