Thread: How To: Remove NX2000 Front Bumper

that is what I thought, is the metal bracket support that holds it together all one piece? meaning is the metal and the spoiler all together as one piece. I believe it is but not 100 percent sure. thanks

The spoiler is separate from the center strip of metal that holds it on the underside. It's actually a metal plate that has a bunch of 10mm bolts in it. On both sides it has 2 studs that bolt through the fenders, and 2 phillips screws on each corner.

can you order those metal plates and screws?

I have some that are rusted.

620 Front Bumper :: Body(Front,Roof & Floor) :: Genuine Nissan Parts :: Sentra / NX Parts (B13) 1991-1994 :: Nissan Parts, NISMO and Nissan Accessories - Courtesyparts.com

Most of those screws will break when you try to remove them.
You can find the metal plate at most auto wreckers.

spoiler brackets which goes to the lower spoiler on the NX2k has nothing to do with the bumper.


If any body has those lower brackets with the screws I will buy them from you? mine are rusted.

@Kleensleeper, yes most do break, lol. The screws for the lip are the worst. I found it best to go ahead and force them to break if they are seized. If not they will rip holes in your lip if that metal clip spins with them. I reused my clips by taking the rest of the screw out with vice grips and channel locks.

@jamanrr, exactly which pieces do you need? There's a few NXs near me at the salvage yard. They may have some good parts on them I can get for you. I've pulled parts for a few guys before. LMK if you want me to do that. I'm sure they have some usable parts left, and I have a stockpile of screws I've saved from other parts. I used some on my lip.

sent you a pm,

thx

There is a metal plate that connects the lower spoiler to to bumper.I pulled one of 3 days ago....Unless we're talking about different parts here.....

nope that is it