Water Temp Sender Wiring
Hey guys,
Just wondering what the two pins on the water temp sender are for. Is it signal and ground? Which pin is for which?
I ask because i've been having an erratic idle and i wanted to change out my temp sensor to check if that was the problem. I believe i had a JDM sensor and plug in my avenir because the plug from that sensor would not fit on the spare temp sensor that i had. I spliced on a connector that fits my spare plug but i dont wanna run the car if the pins are sensitive to being switched.
Please chime in if you can guys! Thanks!
Branden
Aka hawaiiaNX
Just wondering what the two pins on the water temp sender are for. Is it signal and ground? Which pin is for which?
I ask because i've been having an erratic idle and i wanted to change out my temp sensor to check if that was the problem. I believe i had a JDM sensor and plug in my avenir because the plug from that sensor would not fit on the spare temp sensor that i had. I spliced on a connector that fits my spare plug but i dont wanna run the car if the pins are sensitive to being switched.
Please chime in if you can guys! Thanks!
Branden
Aka hawaiiaNX
Be the first to like this post.
Back to top
