Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: 93 b13 speed sensor help

+ Reply To Thread
Posts: 1-3 of 3
2013-03-14 01:18:54
#1
93 b13 speed sensor help
I have a speed sensor issue I think. The speedometer does not read, wires are good, checked continuity all the way to behind the cluster. Checked resistance between the green and red and rolled the wheels slowly, and the meter just sits at 270 ohms. There is no open and close in the circuit, which would tell me a working speed sensor, (if the circuit closed and open = working sensor). The only thing is that I cannot remove the speed sensor out of the trans. I looked everywhere on this forum and only found this link Need help getting a speed sensor out.... I was wondering was there a better way to remove this thing, I am open to all suggestions.

93 b13 sr20det by the way..
Last edited by Uncte on 2013-03-14 at 02-17-02.
2013-03-14 01:43:19
#2
Did the odometer stop working too?
2013-03-14 01:54:42
#3
the odometer is good the speedometer in the cluster is good, I think it is the speed sensor in the trans because of the constant close in the circuit. it never opens when I roll the car wheels

Also I swapped clusters with a known working one.

I really want to know is there a better way to get the speed sensor out of the trans.
Last edited by Uncte on 2013-03-14 at 01-58-00.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top