Thread: door

Yep, it is likely very possible to use the fan. Just figure out which two you need to connect to get it to turn on. It might be a dual speed fan, hence the 4 wires? It shouldn't be too hard to figure out.

Great thanks for an actual answer

Well continuing with the mess I mine as well ask another question. I searched the best I can on mobile device. How do you get a ur crank pulley out. The bolt is off and I have a puller but nothing to bolt it too. Any help is always appreciated.

You have to use a pulley puller or slowly pry it off. Do not pry against the front cover, you can crack it.

I have a pulley puller but there is nothing to screw the bolts into to pull it. Trying prying several different ways and this thing isn't budging

Here is pic of the one in question can't get it.

http://imgur.com/5QhGc4l.jpg

You'll probably have to use the 3 claws on a puller to get it off. Watch those pulley ridges, you don't want to damage them. You could also try putting the claws through some of those large weight-saving holes to get a grip on it without worrying about ruining the pulley ridges.