Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: door

+ Reply To Thread
Posts: 1-10 of 17
2013-03-01 20:50:58
#1
door
Will a 4 door passenger door work on a 2 door at junk yard now need swift response
2013-03-01 20:54:17
#2











Absolutely not.
Last edited by BenFenner on 2013-03-01 at 20-55-45.
2013-03-01 21:24:18
#3
Only if you have a door stretcher.
2013-03-01 22:00:07
#4
Originally Posted by squirlz
Only if you have a door stretcher.

2013-03-01 22:07:16
#5
How about hood or fender
2013-03-01 22:08:00
#6
Hoods and front fenders are identical and can be swapped between 2-doors and 4-doors on a B13.
2013-03-01 22:18:54
#7
Awesome thank you just trying to save on money at the pull a part and only had 4 doors
2013-03-02 21:44:18
#8
Instead of wasting another thread I'll ask my new question here.

I pulled the rad fan out of a 98-99 se-l trying to use it in my 91 ser. but i see the plug for the b14 fan requires 4 wires and my harness has 2. i got the plug and a little bit of a pig tail of the b14. Can i wire this to work and how? Thanks sorry for questions just trying to revive my parts car.
2013-03-02 23:39:16
#9
Originally Posted by SUNNYGTR93
Hey i got a question too .. are the ga16 muffler bearings the same as the sr20?????

Sent from my LG-MS770 using Tapatalk 2


All childish behavior aside. I would like a legitimate answer to the question. Its not a fan from a GA16 its a SR20 car but obviously B14 is different wiring than B13 with it being a 4 pin out instead of 2. Geez and people wonder why the forums are going down hill
2013-03-03 00:09:07
#10
Just find which two wires on the four wire plug turn on the fan and wire those two onto the two wires on the b13
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top